Chlorine and Cyst Reduction 1 um Filtration Cyst Reduction: Cyst Reduction: Giardia & Cryptosporidium NSF Class 1 Turbidity Reduction 10,000 Gallons Class 1 Chlorine Reduction >99% @ 2.5 gpm

MATRIKX® CR1 is the most effective filter available for the combined reduction of cysts and control of large volumes and concentrations of free chlorine. Manufactured using a patented, solid-state extrusion process, the MATRIKX CR1 meets NSF Standard 53 for Class 1 Turbidity and Cyst reduction, including Giardia and Cryptosporidium.

Made of "Genuine MATRIKX Extruded Carbon", the MATRIKX CR1 is a rigid, carbon block composite designed to deliver NSF Class 1 Chlorine reduction at >99% @ 2.5 gpm for 10,000 gallons. The MATRIKX CR1 is ideal for use in food service applications.

For more detailed information, please refer to the Technical Data Bulletin for this product.

Technical Specifications and Order Information

ORDER INFORMATION

Standard filters are finished with an outer polypropylene spun-bonded pre-filtration medium. A protective polypropylene netting is applied to the exterior of the cartridge, Polypropylene end caps with compression gaskets fitting most standard industrial housings are standard.

EXTRUDED CARBON = EXCEPTIONAL VALUE

MATRIKX CR1 filters consist of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency. MATRIKX CR1 filters flow in a radial, outside-to-inside direction, providing increased dirt capacity and low pressure drop. Unlike granular activated carbon (GAC) filters, MATRIKX CR1 cartridges will not channel or bypass, due to the extreme uniformity of their extruded activated carbon core. Service life of the MATRIKX CR1 filter is greatly extended by a layer of 15 µm polypropylene spun-bonded pre-filtration medium and a second layer of 5 µm polypropylene melt blown filter medium.

No Channeling No Fluidizing No Bypassing
Eliminates Release of Carbon Fines
Lowest extractables, pure materials of construction
Maximum service life, resistance to fouling
Manufactured using FDA-approved materials

Notes

1. Chlorine capacity is the capacity in gallons during which the filter will remove greater than 99% of influent free chlorine (2 ppm) when operating at a given flow.

2. Particulate rating is for >99% of particles of a given size as determined as determined from particle counting results.

Flushing Protocol: The MATRIKX CR1 should be flushed for 10 minutes prior to use.